EFI vv Supercharger vv Home

1.0 In order to make the dream a reality, I needed my test lab. I mounted an old /6 on the engine dolly and began fabricating the blower support bracket. The bracket will be made of steel intially but after working through the kinks, I intend on getting one fabricated out of aluminum. In order to provide the rigidity, its supported in the front by coming off the water pump bolts (using an old power steering bracket off a donar car) In the back, I'm coming directly off the motor mount flange.
1.1 The crank pulley's position was the first to be fixed. This then allowed the blower to be positioned fore & aft. Finally, the idler was positioned.

1.0 It's served its purpose. Everything fits. It's now time to transfer the goodies to Big Red.